#

60 Second Binary Options

Unkle Mike. Culling Of Invisible Objects In Quake Related Engines

Intro
Despite all these great achievements in video cards development and the sworn assurances of developers about drawing 2 to 3 million polygons on screen without a significant FPS drop, it’s not all that rosy in reality. It depends on methods of rendering, on the number of involved textures and on the complexity and number of involved shaders. So even if all this really does ultimately lead to high performance, it only happens in the demos that developers themselves kindly offer. In these demos, some "spherical dragons in vacuum" made of a good hundred thousand polygons are drawn very quickly indeed. However, the real ingame situation for some reason never looks like this funny dragon from a demo, and as a result many comrades abandon the development of their "Crysis killer" as soon as they can render a single room with a couple of light sources, because for some reason FPS in this room fluctuate around 40-60 even on their 8800GTS and upon creating second room it drops to a whopping 20. Of course with problems like this, it would be incorrect to say how things aren’t that bad and how the trouble of such developers are purely in their absence of correctly implemented culling, and how it is time for them to read this article. But for those who have already overcome “the first room syndrome" and tried to draw – inferior though, but, anyway - the world, this problem really is relevant.
However, it should be borne in mind that QUAKE, written in ancient times, was designed for levels of a “corridor" kind exclusively; therefore methods of clipping discussed in this article are not applicable to landscapes, such as ones from STALKER or Crysis, since completely different methods work there, whose analysis is beyond the scope of this article. Meanwhile we’ll talk about the classic corridor approach to mapping and the effective clipping of invisible surfaces, as well as clipping of entire objects.

The paper tree of baloon leaves

As you probably know, QUAKE uses BSP, Binary Spacing Partition tree. This is a space indexing algorithm, and BSP itself doesn’t care if the space is open or closed, it doesn’t even care if the map is sealed, it can be anything. BSP implies the division of a three-dimensional object into a certain number of secant planes called "the branches" or "the nodes" and volumetric areas or rooms called "the leaves". The names are confusing as you can see. In QUAKE / QUAKE2 the branches usually contain information about the surfaces that this branch contain, and the leaves are an empty space, not filled with nothing. Although sometimes leaves may contain water for example (in a form of a variable that indicates, specifically, that we’ve got water in this leaf). Also, the leaf contains a pointer to the data of potential visibility (Potentially Visible Set, PVS) and a list of all surfaces that are marked as being visible from this leaf. Actually the approach itself implies that we are able to draw our world however we prefer, either using leaves only or using branches only. This is especially noticeable in different versions of QUAKE: for example, in QUAKE1 in a leaf we just mark our surfaces as visible and then we also sequentially go through all the surfaces visible from a particular branch, assembling chains of surfaces to draw them later. But in QUAKE3, we can accumulate visible surfaces no sooner than we’ll get into the leaf itself.
In QUAKE and QUAKE2, all surfaces must lie on the node, which is why the BSP tree grows rather quickly, but in exchange this makes it possible to trace these surfaces by simply moving around the tree, not wasting time to check each surface separately, which affects the speed of the tracer positively. Because of this, unique surface is linked to each node (the original surface is divided into several if necessary) so in the nodes we always have what is known to be visible beforehand, and therefore we can perform a recursive search on the tree using the BBox pyramid of frustum as a direction of our movement along the BSP tree (SV_RecursiveWorldNode function).
In QUAKE3, the tree was simplified and it tries to avoid geometry cuts as much as possible (a BSP tree is not even obliged to cut geometry, such cuts are but a matter of optimality of such a tree). And surfaces in QUAKE3 do not lie on the node because patches and triangle models lie there instead. But what happens would they be put on the node nevertheless, you can see on the example of "The Edge Of Forever" map that I compiled recently for an experimental version of Xash. Turns out, in places that had a couple thousand visible nodes and leaves in the original, there are almost 170 thousand of them with a new tree. And this is the result after all the preliminary optimizations, otherwise it could have been even more, he-he. Yeah, so... For this reason, the tree in QUAKE3 does not put anything on the node and we certainly do need to get into the leaf, mark visible surfaces in it and add them to the rendering list. On the contrary, in QUAKE / QUAKE2 going deep down to the leaf itself is not necessary.
Invisible polygon cutoff (we are talking about world polys, separate game objects will be discussed a bit later) is based on two methods:
The first method is to use bit-vectors of visibility (so-called PVS - Potential Visible Set). The second method is regular frustum culling which actually got nothing to do with BSP but works just as efficiently, for a certain number of conditions of course. Bottom line: together these two methods provide almost perfect clipping of invisible polygons, drawing a very small visible piece out of the vast world. Let's take a closer look at PVS and how it works.

When FIDO users get drunk

Underlying idea of PVS is to expose the fact that one leaf is visible from another. For BSP alone it’s basically impossible because leaves from completely different branches can be visible at the same time and you will never find a way to identify the pattern for leafs from different branches seeing each other - it simply doesn’t exist. Therefore, the compiler has to puff for us, manually checking the visibility of all leaves from all leaves. Information about visibility in this case is scanty: one Boolean variable with possible values 0 and 1. 0 means that leaf is not visible and 1 means that leaf is visible. It is easy to guess that for each leaf there is a unique set of such Boolean variables the size of the total number of leaves on the map. So a set like this but for all the leaves will take an order of magnitude more space: the number of leaves multiplied by the number of leaves and multiplied by the size of our variable in which we will store information of visibility (0 \ 1).
And the number of leaves, as you can easily guess, is determined by map size map and by the compiler, which upon reaching a certain map size, cease to divide the world into leaves and treat resulting node as a leaf. Leaf size vary for different QUAKE. For example, in QUAKE1 leaves are very small. For example I can tell you that the compiler divide standard boxmap in QUAKE1 into as many as four leaves meanwhile in QUAKE3 similar boxmap takes only one leaf. But we digress.
Let's estimate the size of our future PVS file. Suppose we have an average map and it has a couple thousand leaves. Would we imagine that the information about the leaf visibility is stored in a variable of char type (1 byte) then the size of visdata for this level would be, no more no less, almost 4 megabytes. That is, much AF. Of course an average modern developer would shrug and pack the final result into zip archive but back in 1995 end users had modest machines, their memory was low and therefore visdata was packed in “more different” ways. The first step in optimizing is about storing data not in bytes, but in bits. It is easy to guess that such approach reduce final result as much as 8 times and what's typical AF – does it without any resource-intensive algorithms like Huffman trees. Although in exchange, such approach somewhat worsened code usability and readability. Why am I writing this? Due to many developers’ lack of understanding for conditions in code like this:
if ( pvs [ leafnum >> 3 ] & ( 1 << ( leafnum & 7 ) ) ) { }
Actually, this condition implement simple, beautiful and elegant access to the desired bit in the array (as one can recall, addressing less than one byte is impossible and you can only work with them via bit operations)

Titans that keep the globe spinning

The visible part of the world is cut off in the same fashion: we find the current leaf where the player is located (in QUAKE this is implemented by the Mod_PointInLeaf function) then we get a pointer to visdata for the current leaf (for our convenience, it is linked directly to the leaf in the form of "compressed_vis" pointer) and then stupidly go through all the leaves and branches of the map and check them for being visible from our leaf (this can be seen in the R_MarkLeaves function). As long as some leaves turn out to be visible from the current leaf we assign them a unique number from "r_visframecount" sequence which increases by one every frame. Thus, we emphasize that this leaf is visible when we build the current frame. In the next frame, "r_framecount" is incremented by one and all the leaves are considered invisible again. As one can understand, this is much more convenient and much faster than revisiting all the leaves at the end of each frame and zeroing their "visible" variable. I drew attention to this feature because this mechanism also bothers some and they don’t understand how it works.
The R_RecursiveWorldNode function “walk” along leaves and branches marked this way. It cuts off obviously invisible leaves and accumulate a list of surfaces from visible ones. Of course the first check is done for the equivalence of r_visframecount and visframe for the node in question. Then the branch undergoes frustum pyramid check and if this check fails then we don’t climb further along this branch. Having stumbled upon a leaf, we mark all its surfaces visible the same way, assigning the current r_framecount value to the visframe variable (in the future this will help us to determine quickly whether a certain surface is visible in the current frame). Then, using a simple function, we determine which side we are from the plane of our branch (each branch has its own plane, literally called “plane” in the code) and, again, for now, we just take all surfaces linked to this branch and add them to the drawing chain (so-called “texturechain”), although nobody can actually stop us from drawing them immediately, right there, (in QUAKE1 source code one can see both options) having previously checked these surfaces for clipping with the frustum pyramid, or at least having made sure that the surface faces us.
In QUAKE, each surface has a special flag SURF_PLANEBACK which help us determine the orientation of the surface. But in QUAKE3 there is no such flag anymore, and clipping of invisible surfaces is not as efficient, sending twice as many surfaces for rendering. However, their total number after performing all the checks is not that great. However, whatever one may say, adding this check to Xash3D raised average FPS almost one and half times in comparison to original Half-Life. This is on the matter whether it is beneficial. But we digress.
So after chaining and drawing visible surfaces, we call R_RecursiveWorldNode again but now - for the second of two root branches of BSP tree. Just in case. Because the visible surfaces, too, may well be there. When the recursion ends, the result will either be a whole rendered world, or chains of visible surfaces at least. This is what can actually be sent for rendering with OpenGL or Direct3D, well, if we did not draw our world right in the R_RecursiveWorldNode function of course. Actually this method with minor upgrades successfully used in all three QUAKEs.

A naked man is in a wardrobe because he's waiting for a tram

One of the upgrades is utilization of the so-called areaportals. This is another optimization method coming straight out of QUAKE2. The point of using areaportals is about game logic being able to turn the visibility of an entire sectors on and off at its discretion. Technically, this is achieved as follows: the world is divided into zones similar to the usual partitioning along the BSP tree, however, there can’t be more than 256 of them (later I will explain why) and they are not connected in any way.
Regular visibility is determined just like in QUAKE; however, by installing a special “func_areaportal” entity we can force the compiler to split an area in two. This mechanism operates on approximately the same principle as the algorithm of searching for holes in the map, so you won’t deceive the compiler by putting func_areaportal in a bare field - the compiler will simply ignore it. Although if you make areaportal the size of the cross-section of this field (to the skybox in all directions) in spite of everything the zones will be divided. We can observe this technique in Half-Life 2 where an attempt to return to old places (with cheats for example) shows us disconnected areaportals and a brief transition through the void from one zone to another. Actually, this mechanism helped Half-Life 2 simulate large spaces successfully and still use BSP level structure (I have already said that BSP, its visibility check algorithm to be precise, is not very suitable for open spaces).
So installed areaportal forcibly breaks one zone into two, and the rest of the zoneization is at the discretion of the compiler, which at the same time makes sure not to exceed 256 zones limit, so their sizes can be completely different. Well, I repeat, it depends on the overall size of the map. Our areaportal is connected to some door dividing these two zones. When the door is closed - it turns areaportal off and the zones are separated from each other. Therefore, if the player is not in the cut off zone, then rendering it is not worth it. In QUAKE, we’d have to do a bunch of checks and it’s possible that we could only cut off a fraction of the number of polygons (after all, the door itself is not an obstacle for either visibility check, or even more so, nor it is for frustum). Compare to case in point: one command is issued - and the whole room is excluded from visibility. “Not bad,” you’d say, “but how would the renderer find out? After all, we performed all our operations on the server and the client does not know anything about it.” And here we go back to the question why there can’t be more than 256 zones.
The point is, information about all of zone visibility is, likewise, packaged in bit flags (like PVS) and transmitted to the client in a network message. Dividing 256 bits by 8 makes 32 bytes, which generally isn’t that much. In addition, the tail of this information can be cut off at ease if it contains zeroes only. Though the payback for such an optimization would appear as an extra byte that will have to be transmitted over the network to indicate the actual size of the message about the visibility of our zones. But, in general, this approach justified.

Light_environment traces enter from the back

Source Engine turned out to have a terrible bug which makes the whole areaportal thing nearly meaningless. Numerous problems arise because of it: water breaks down into segments that pop in, well, you should be familiar with all this by now. Areaportal cuts the geometry unpredictably, like an ordinary secant plane, but its whole point is being predictable! Whereas areaportal brushes in Source Engine have absolutely no priority in splitting the map. It should be like this: first, the tree is cut the regular way. And when no suitable planes left, the final secant plane of areaportal is used. This is the only way to cut the sectors correctly.

Modern problems

The second optimization method, as I said, is increased size of the final leaf akin to QUAKE3. It is believed that a video card would draw a certain amount of polygons much faster than the CPU would check whether they are visible. This come from the very concept of visibility check: if visibility check takes longer than direct rendering, then well, to hell with this check. The controversy of this approach is determined by a wide range of video cards present at the hands of the end users, and it is strongly determined by the surging fashion for laptops and netbooks in which a video card is a very conditional and very weak concept (don’t even consider its claimed Shader Model 3 support). Therefore, for desktop gaming machines it would be more efficient to draw more at a time, but for weak video cards of laptops traditional culling will remain more reliable. Even if it is such a simple culling as I described earlier.

Decompression sickness simulator

Although I should also mention the principles of frustum culling, perhaps they are incomprehensible to some. Cutoff by frustum pyramid is actually pure mathematics without any compiler calculations. From the current direction of the player’s gaze, a clipping pyramid is built (the tip of the pyramid – in case someone can’t understand - is oriented towards the player’s point of view and its base is oriented in the direction of player’s view). The angle between the walls of the pyramid can be sharp or blunt - as you probably guessed already, it depends on the player's FOV. In addition, the player can forcefully pull the far wall of the pyramid closer to himself (yes, this is the notorious “MaxRange” parameter in the “worldspawn” menu of the map editor). Of course, OpenGL also builds a similar pyramid for its internal needs when it takes information from the projection matrix but we’re talking local pyramid now. The finished pyramid consists of 4-6 planes (QUAKE uses only 4 planes and trusts OpenGL to independently cut far and near polygons, but if you write your own renderer and intend to support mirrors and portals you will definitely need all six planes). Well, the frustum test itself is an elementary check for a presence of AA-box (AABB, Axis Aligned Bounding Box) in the frustum pyramid. Or speaking more correctly, this is a check for their intersection. Let me remind you that each branch has its own dimensions (a fragment of secant plane bound by neighboring perpendicular secant planes) which are checked for intersection. But unfortunately the frustum test has one fundamental drawback - it cannot cut what is directly in the player’s view. We can adjust the cutoff distance, we can even make that “ear feint” like they do in QFusion where final zFar value is calculated in each frame before rendering and then taken into account in entity clipping, but after all, whatever they say, the value itself was obtained from PVS-information. Therefore, neither of two methods can replace the other but they just complement each other. This should be remembered.

I gotta lay off the pills I'm taking

It seems that we figured out the rendering of the world and now we are moving on smoothly to cutting off moving objects... which are all the visible objects in the world! Even ones that, at te first glance, stand still and aren’t planning to move anywhere. Cause the player moves! From one point he still sees a certain static object, and from another point, of course, he no longer does. This detail should also be considered.
Actually, at the beginning of this article I already spoke in detail about an algorithm of objects’ visibility check: first we find the visible leaf for the player, then we find the visible leaf for the entity and then we check by visdata whether they see each other. I, too, would like to clarify (if someone suddenly does not understand) how each moving entity is given the number of its current visible leaf, i.e. directly for entity’s its own current position, and the leaves themselves are of course static and always in the same place.

Ostrich is such an OP problem solver

So the method described above has two potential problems:
The first problem is that even if A equals B, then, oddly enough, B is far from being always equal A. In other words, entity A can see entity B, but this does not mean that entity B see entity A, and, no, it’s not about one of them “looking” away. So why is this happening? Most often for two reasons:
The first reason is that one of the entities’ ORIGIN sit tight inside the wall and the Mod_PointInLeaf function for it points to the outer “zero” leaf from which EVERYTHING is visible (haven’t any of you ever flown around the map?). Meanwhile, no leaf inside the map can see outer leaf - these two features actually explain an interesting fact of an entire world geometry becoming visible and on the contrary, all objects disappearing when you fly outside the map. In regular mode, similar problems can occur for objects attached to the wall or recessed into the wall. For example, sometimes the sounds of a pressed button or opening door disappear because its current position went beyond the world borders. This phenomenon is fought by interchanging objects A and B or by obtaining alternative points for the position of an object, but all the same, it’s all not very reliable.

But lawyer said that you don't exist

In addition, as I said, there is another problem. It come from the fact that not every entity fits a single leaf. Only the player is so small that he can always be found in one leaf only (well, in the most extreme case - in two leaves on the border of water and air. This phenomenon is fought with various hacks btw), but some giant hentacle or on the contrary, an elevator made as a door entity, can easily occupy 30-40 leaves at a time. An attempt to check one leaf (for example, one where the center of the model is) will inevitably lead to a deplorable result: as soon as the center of an object will be out of the player’s visibility range, the entire object will disappear completely. The most common case is the notorious func_door used as an elevator. There is one in QUAKE on the E1M1. Observe: it travels halfway and then its ORIGIN is outside the map and therefore it must disappear from the player’s field of view. However, it does not go anywhere, right? Let us see in greater detail how this is done.
The simplest idea that comes to one’s mind: since the object occupies several leaves, we have to save them all somewhere in the structure of an object in the code and check them one by one. If at least one of these leaves is visible, then the whole object is visible (for example, it’s very tip). This is exactly what was implemented in QUAKE: a static array for 16 leaves and a simple recursive function SV_FindTouchedLeafs that looks for all the leaves in range hardcoded in "pev->absmins" and "pev->absmax" variables (pev i.e. a Pointer to EntVars_t table). absmins and absmax are recalculated each time SV_LinkEdict (or its more specific case of UTIL_SetOrigin) is called. Hence the quite logical conclusion that a simple change of ORIGIN without recalculating its visible leaf will take the object out of visibility sooner or later even if, surprisingly enough, it’s right in front of the player and the player should technically still be able to see it. Inb4 why one have to call UTIL_SetOrigin and wouldn’t it be easier to just assign new value to the "pev->origin" vector without calling this function. It wouldn’t.
With this method we can solve both former problems perfectly: we can fight the loss of visibility if the object's ORIGIN went beyond the world borders and level the difference of visibility for A->B versus visibility for B->A.

A secret life of monster_tripmine

Actually we’ve yet to encounter another problem, but it does not occur immediately. Remember, we’ve got an array of 16 leaves. But what if it won’t be enough? Thank God there are no beams in QUAKE and no very long elevators made as func_door either. For this exact reason. Because when the array is filled to capacity, the SV_FindTouchedLeafs function just stop and we can only hope that there won’t be that many cases when an object disappear right before our eyes. But in the original QUAKE, such cases may well be. In Half-Life, the situation is even worse - as you can remember there are rays that can reach for half the map, tripmine rays for example. In this case, a situation may occur when we see just the very tip of the ray. For most of these rays, 16 leaves are clearly not enough. Valve tried to remedy the situation by increasing the array to 48 leaves. That helped. On early maps. If you remember, at the very beginning of the game when the player has already got off the trailer, he enters that epic elevator that takes him down. The elevator is made as a door entity and it occupies 48 leaves exactly. Apparently, the final expansion of the array was based after its dimensions. Then the programmers realized that this isn’t really a solution, because no matter how much one would expand the array, it can still be lacking for something. So then they screwed up an alternative method for visibility check: a head branch (headnode) check. In short, this is still the same SV_FindTouchedLeafs but now it is called directly from the place of visibility check and with a subsequent transfer of visdata in there. In general, it is not used very often because it is slower than checking pre-accumulated leaves, that is, it is intended just for such non-standard cases like this one.
Well, and since, I hope, general picture of the clipping mechanism already beginning to take shape in your mind, I will finish the article in just a few words.
On the server, all objects that have already passed the visibility check are added to the network message containing information about visible objects. Thus, on the client, the list of visible entities is already cut off by PVS and we do not have to do this again and therefore a simple frustum check is enough. You ask, "why did we have to cut off invisible objects on the server when we could do this later when we are on the client already?" I reply: yes, we could, but now the objects cut off on the server didn’t get into the network message and saved us some traffic. And since the player still does not see them, what is the point of transferring them to the client just to check them for visibility after? This is a kind of double optimizing :)
© Uncle Mike 2012
submitted by crystallize1 to HalfLife [link] [comments]

Binary Options Review; Best Binary Options Brokers

Binary Options Review; Best Binary Options Brokers
​
Binary Options Review; Best Binary Options Brokers
We have compared the best regulated binary options brokers and platforms in May 2020 and created this top list. Every binary options company here has been personally reviewed by us to help you find the best binary options platform for both beginners and experts. The broker comparison list below shows which binary trading sites came out on top based on different criteria.
You can put different trading signals into consideration such as using payout (maximum returns), minimum deposit, bonus offers, or if the operator is regulated or not. You can also read full reviews of each broker, helping you make the best choice. This review is to ensure traders don't lose money in their trading account.
How to Compare Brokers and Platforms
In order to trade binary options, you need to engage the services of a binary options broker that accepts clients from your country e.g. check US trade requirements if you are in the United States. Here at bitcoinbinaryoptionsreview.com, we have provided all the best comparison factors that will help you select which trading broker to open an account with. We have also looked at our most popular or frequently asked questions, and have noted that these are important factors when traders are comparing different brokers:
  1. What is the Minimum Deposit? (These range from $5 or $10 up to $250)
  2. Are they regulated or licensed, and with which regulator?
  3. Can I open a Demo Account?
  4. Is there a signals service, and is it free?
  5. Can I trade on my mobile phone and is there a mobile app?
  6. Is there a Bonus available for new trader accounts? What are the Terms and
  7. conditions?
  8. Who has the best binary trading platform? Do you need high detail charts with technical analysis indicators?
  9. Which broker has the best asset lists? Do they offer forex, cryptocurrency, commodities, indices, and stocks – and how many of each?
  10. Which broker has the largest range of expiry times (30 seconds, 60 seconds, end of the day, long term, etc?)
  11. How much is the minimum trade size or amount?
  12. What types of options are available? (Touch, Ladder, Boundary, Pairs, etc)
  13. Additional Tools – Like Early closure or Metatrader 4 (Mt4) plugin or integration
  14. Do they operate a Robot or offer automated trading software?
  15. What is Customer Service like? Do they offer telephone, email and live chat customer support – and in which countries? Do they list direct contact details?
  16. Who has the best payouts or maximum returns? Check the markets you will trade.
The Regulated Binary Brokers
Regulation and licensing is a key factor when judging the best broker. Unregulated brokers are not always scams, or untrustworthy, but it does mean a trader must do more ‘due diligence’ before trading with them. A regulated broker is the safest option.
Regulators - Leading regulatory bodies include:
  • CySec – The Cyprus Securities and Exchange Commission (Cyprus and the EU)
  • FCA – Financial Conduct Authority (UK)
  • CFTC – Commodity Futures Trading Commission (US)
  • FSB – Financial Services Board (South Africa)
  • ASIC – Australia Securities and Investment Commission
There are other regulators in addition to the above, and in some cases, brokers will be regulated by more than one organization. This is becoming more common in Europe where binary options are coming under increased scrutiny. Reputable, premier brands will have regulation of some sort.
Regulation is there to protect traders, to ensure their money is correctly held and to give them a path to take in the event of a dispute. It should therefore be an important consideration when choosing a trading partner.
Bonuses - Both sign up bonuses and demo accounts are used to attract new clients. Bonuses are often a deposit match, a one-off payment, or risk-free trade. Whatever the form of a bonus, there are terms and conditions that need to be read.
It is worth taking the time to understand those terms before signing up or clicking accept on a bonus offer. If the terms are not to your liking then the bonus loses any attraction and that broker may not be the best choice. Some bonus terms tie in your initial deposit too. It is worth reading T&Cs before agreeing to any bonus, and worth noting that many brokers will give you the option to ‘opt-out’ of taking a bonus.
Using a bonus effectively is harder than it sounds. If considering taking up one of these offers, think about whether, and how, it might affect your trading. One common issue is that turnover requirements within the terms, often cause traders to ‘over-trade’. If the bonus does not suit you, turn it down.
How to Find the Right Broker
But how do you find a good broker? Well, that’s where BitcoinBinaryOptionsReview.com comes in. We assess and evaluate binary options brokers so that traders know exactly what to expect when signing up with them. Our financial experts have more than 20 years of experience in the financial business and have reviewed dozens of brokers.
Being former traders ourselves, we know precisely what you need. That’s why we’ll do our best to provide our readers with the most accurate information. We are one of the leading websites in this area of expertise, with very detailed and thorough analyses of every broker we encounter. You will notice that each aspect of any broker’s offer has a separate article about it, which just goes to show you how seriously we approach each company. This website is your best source of information about binary options brokers and one of your best tools in determining which one of them you want as your link to the binary options market.
Why Use a Binary Options Trading Review?
So, why is all this relevant? As you may already know, it is difficult to fully control things that take place online. There are people who only pose as binary options brokers in order to scam you and disappear with your money. True, most of the brokers we encounter turn out to be legit, but why take unnecessary risks?
Just let us do our job and then check out the results before making any major decisions. All our investigations regarding brokers’ reliability can be seen if you click on our Scam Tab, so give it a go and see how we operate. More detailed scam reports than these are simply impossible to find. However, the most important part of this website can be found if you go to our Brokers Tab.
There you can find extensive analyses of numerous binary options brokers irrespective of your trading strategy. Each company is represented with an all-encompassing review and several other articles dealing with various aspects of their offer. A list containing the very best choices will appear on your screen as you enter our website whose intuitive design will allow you to access all the most important information in real-time.
We will explain minimum deposits, money withdrawals, bonuses, trading platforms, and many more topics down to the smallest detail. Rest assured, this amount of high-quality content dedicated exclusively to trading cannot be found anywhere else. Therefore, visiting us before making any important decisions regarding this type of trading is the best thing to do.
CONCLUSION: Stay ahead of the market, and recover from all kinds of binary options trading loss, including market losses in bitcoin, cryptocurrency, and forex markets too. Send your request via email to - [email protected]
submitted by Babyelijah to u/Babyelijah [link] [comments]

Invisible Object Culling In Quake Related Engines (REVISED)

Prologue
Despite all these great achievements in video cards development and the sworn assurances of developers about drawing 2 to 3 million polygons on screen without a significant FPS drop, it’s not all that rosy in reality. It depends on methods of rendering, on the number of involved textures and on the complexity and number of involved shaders. So even if all this really does ultimately lead to high performance, it only happens in the demos that developerss themselves kindly offer. In these demos, some "spherical dragons in vacuum" made of a good hundred thousand polygons are drawn very quickly indeed. However, the real ingame situation for some reason never looks like this funny dragon from a demo, and as a result many comrades abandon the development of their "Crysis killer" as soon as they can render a single room with a couple of light sources, because for some reason FPS in this room fluctuate around 40-60 even on their 8800GTS and upon creating second room it drops to a whopping 20. Of course with problems like this, it would be incorrect to say how things aren’t that bad and how the trouble of such developers are purely in their absence of correctly implemented culling, and how it is time for them to read this article. But for those who have already overcome “the first room syndrome" and tried to draw – inferior though, but, anyway - the world, this problem really is relevant.
However, it should be borne in mind that QUAKE, written in ancient times, was designed for levels of a “corridor" kind exclusively; therefore methods of clipping discussed in this article are not applicable to landscapes, such as ones from STALKER or Crysis, since completely different methods work there, whose analysis is beyond the scope of this article. Meanwhile we’ll talk about the classic corridor approach to mapping and the effective clipping of invisible surfaces, as well as clipping of entire objects.

The paper tree of baloon leaves

As you probably know, QUAKE uses BSP, Binary Spacing Partition tree. This is a space indexing algorithm, and BSP itself doesn’t care if the space is open or closed, it doesn’t even care if the map is sealed, it can be anything. BSP implies the division of a three-dimensional object into a certain number of secant planes called "the branches" or "the nodes" and volumetric areas or rooms called "the leaves". The names are confusing as you can see. In QUAKE / QUAKE2 the branches usually contain information about the surfaces that this branch contain, and the leaves are an empty space, not filled with nothing. Although sometimes leaves may contain water for example (in a form of a variable that indicates, specifically, that we’ve got water in this leaf). Also, the leaf contains a pointer to the data of potential visibility (Potentially Visible Set, PVS) and a list of all surfaces that are marked as being visible from this leaf. Actually the approach itself implies that we are able to draw our world however we prefer, either using leaves only or using branches only. This is especially noticeable in different versions of QUAKE: for example, in QUAKE1 in a leaf we just mark our surfaces as visible and then we also sequentially go through all the surfaces visible from a particular branch, assembling chains of surfaces to draw them later. But in QUAKE3, we can accumulate visible surfaces no sooner than we’ll get into the leaf itself.
In QUAKE and QUAKE2, all surfaces must lie on the node, which is why the BSP tree grows rather quickly, but in exchange this makes it possible to trace these surfaces by simply moving around the tree, not wasting time to check each surface separately, which affects the speed of the tracer positively. Because of this, unique surface is linked to each node (the original surface is divided into several if necessary) so in the nodes we always have what is known to be visible beforehand, and therefore we can perform a recursive search on the tree using the BBox pyramid of frustum as a direction of our movement along the BSP tree (SV_RecursiveWorldNode function).
In QUAKE3, the tree was simplified and it tries to avoid geometry cuts as much as possible (a BSP tree is not even obliged to cut geometry, such cuts are but a matter of optimality of such a tree). And surfaces in QUAKE3 do not lie on the node because patches and triangle models lie there instead. But what happens would they be put on the node nevertheless, you can see on the example of "The Edge Of Forever" map that I compiled recently for an experimental version of Xash. Turns out, in places that had a couple thousand visible nodes and leaves in the original, there are almost 170 thousand of them with a new tree. And this is the result after all the preliminary optimizations, otherwise it could have been even more, he-he. Yeah, so... For this reason, the tree in QUAKE3 does not put anything on the node and we certainly do need to get into the leaf, mark visible surfaces in it and add them to the rendering list. On the contrary, in QUAKE / QUAKE2 going deep down to the leaf itself is not necessary.
Invisible polygon cutoff (we are talking about world polys, separate game objects will be discussed a bit later) is based on two methods:
The first method is to use bit-vectors of visibility (so-called PVS - Potential Visible Set). The second method is regular frustum culling which actually got nothing to do with BSP but works just as efficiently, for a certain number of conditions of course. Bottom line: together these two methods provide almost perfect clipping of invisible polygons, drawing a very small visible piece out of the vast world. Let's take a closer look at PVS and how it works.

When FIDO users get drunk

Underlying idea of PVS is to expose the fact that one leaf is visible from another. For BSP alone it’s basically impossible because leaves from completely different branches can be visible at the same time and you will never find a way to identify the pattern for leafs from different branches seeing each other - it simply doesn’t exist. Therefore, the compiler has to puff for us, manually checking the visibility of all leaves from all leaves. Information about visibility in this case is scanty: one Boolean variable with possible values 0 and 1. 0 means that leaf is not visible and 1 means that leaf is visible. It is easy to guess that for each leaf there is a unique set of such Boolean variables the size of the total number of leaves on the map. So a set like this but for all the leaves will take an order of magnitude more space: the number of leaves multiplied by the number of leaves and multiplied by the size of our variable in which we will store information of visibility (0 \ 1).
And the number of leaves, as you can easily guess, is determined by map size map and by the compiler, which upon reaching a certain map size, cease to divide the world into leaves and treat resulting node as a leaf. Leaf size vary for different QUAKE. For example, in QUAKE1 leaves are very small. For example I can tell you that the compiler divide standard boxmap in QUAKE1 into as many as four leaves meanwhile in QUAKE3 similar boxmap takes only one leaf. But we digress.
Let's estimate the size of our future PVS file. Suppose we have an average map and it has a couple thousand leaves. Would we imagine that the information about the leaf visibility is stored in a variable of char type (1 byte) then the size of visdata for this level would be, no more no less, almost 4 megabytes. That is, much AF. Of course an average modern developer would shrug and pack the final result into zip archive but back in 1995 end users had modest machines, their memory was low and therefore visdata was packed in “more different” ways. The first step in optimizing is about storing data not in bytes, but in bits. It is easy to guess that such approach reduce final result as much as 8 times and what's typical AF – does it without any resource-intensive algorithms like Huffman trees. Although in exchange, such approach somewhat worsened code usability and readability. Why am I writing this? Due to many developers’ lack of understanding for conditions in code like this:
if ( pvs [ leafnum >> 3 ] & ( 1 << ( leafnum & 7 ) ) ) { }
Actually, this condition implement simple, beautiful and elegant access to the desired bit in the array (as one can recall, addressing less than one byte is impossible and you can only work with them via bit operations)

Titans that keep the globe spinning

The visible part of the world is cut off in the same fashion: we find the current leaf where the player is located (in QUAKE this is implemented by the Mod_PointInLeaf function) then we get a pointer to visdata for the current leaf (for our convenience, it is linked directly to the leaf in the form of "compressed_vis" pointer) and then stupidly go through all the leaves and branches of the map and check them for being visible from our leaf (this can be seen in the R_MarkLeaves function). As long as some leaves turn out to be visible from the current leaf we assign them a unique number from "r_visframecount" sequence which increases by one every frame. Thus, we emphasize that this leaf is visible when we build the current frame. In the next frame, "r_framecount" is incremented by one and all the leaves are considered invisible again. As one can understand, this is much more convenient and much faster than revisiting all the leaves at the end of each frame and zeroing their "visible" variable. I drew attention to this feature because this mechanism also bothers some and they don’t understand how it works.
The R_RecursiveWorldNode function “walk” along leaves and branches marked this way. It cuts off obviously invisible leaves and accumulate a list of surfaces from visible ones. Of course the first check is done for the equivalence of r_visframecount and visframe for the node in question. Then the branch undergoes frustum pyramid check and if this check fails then we don’t climb further along this branch. Having stumbled upon a leaf, we mark all its surfaces visible the same way, assigning the current r_framecount value to the visframe variable (in the future this will help us to determine quickly whether a certain surface is visible in the current frame). Then, using a simple function, we determine which side we are from the plane of our branch (each branch has its own plane, literally called “plane” in the code) and, again, for now, we just take all surfaces linked to this branch and add them to the drawing chain (so-called “texturechain”), although nobody can actually stop us from drawing them immediately, right there, (in QUAKE1 source code one can see both options) having previously checked these surfaces for clipping with the frustum pyramid, or at least having made sure that the surface faces us.
In QUAKE, each surface has a special flag SURF_PLANEBACK which help us determine the orientation of the surface. But in QUAKE3 there is no such flag anymore, and clipping of invisible surfaces is not as efficient, sending twice as many surfaces for rendering. However, their total number after performing all the checks is not that great. However, whatever one may say, adding this check to Xash3D raised average FPS almost one and half times in comparison to original Half-Life. This is on the matter whether it is beneficial. But we digress.
So after chaining and drawing visible surfaces, we call R_RecursiveWorldNode again but now - for the second of two root branches of BSP tree. Just in case. Because the visible surfaces, too, may well be there. When the recursion ends, the result will either be a whole rendered world, or chains of visible surfaces at least. This is what can actually be sent for rendering with OpenGL or Direct3D, well, if we did not draw our world right in the R_RecursiveWorldNode function of course. Actually this method with minor upgrades successfully used in all three QUAKEs.

A naked man is in a wardrobe because he's waiting for a tram

One of the upgrades is utilization of the so-called areaportals. This is another optimization method coming straight out of QUAKE2. The point of using areaportals is about game logic being able to turn the visibility of an entire sectors on and off at its discretion. Technically, this is achieved as follows: the world is divided into zones similar to the usual partitioning along the BSP tree, however, there can’t be more than 256 of them (later I will explain why) and they are not connected in any way.
Regular visibility is determined just like in QUAKE; however, by installing a special “func_areaportal” entity we can force the compiler to split an area in two. This mechanism operates on approximately the same principle as the algorithm of searching for holes in the map, so you won’t deceive the compiler by putting func_areaportal in a bare field - the compiler will simply ignore it. Although if you make areaportal the size of the cross-section of this field (to the skybox in all directions) in spite of everything the zones will be divided. We can observe this technique in Half-Life 2 where an attempt to return to old places (with cheats for example) shows us disconnected areaportals and a brief transition through the void from one zone to another. Actually, this mechanism helped Half-Life 2 simulate large spaces successfully and still use BSP level structure (I have already said that BSP, its visibility check algorithm to be precise, is not very suitable for open spaces).
So installed areaportal forcibly breaks one zone into two, and the rest of the zoneization is at the discretion of the compiler, which at the same time makes sure not to exceed 256 zones limit, so their sizes can be completely different. Well, I repeat, it depends on the overall size of the map. Our areaportal is connected to some door dividing these two zones. When the door is closed - it turns areaportal off and the zones are separated from each other. Therefore, if the player is not in the cut off zone, then rendering it is not worth it. In QUAKE, we’d have to do a bunch of checks and it’s possible that we could only cut off a fraction of the number of polygons (after all, the door itself is not an obstacle for either visibility check, or even more so, nor it is for frustum). Compare to case in point: one command is issued - and the whole room is excluded from visibility. “Not bad,” you’d say, “but how would the renderer find out? After all, we performed all our operations on the server and the client does not know anything about it.” And here we go back to the question why there can’t be more than 256 zones.
The point is, information about all of zone visibility is, likewise, packaged in bit flags (like PVS) and transmitted to the client in a network message. Dividing 256 bits by 8 makes 32 bytes, which generally isn’t that much. In addition, the tail of this information can be cut off at ease if it contains zeroes only. Though the payback for such an optimization would appear as an extra byte that will have to be transmitted over the network to indicate the actual size of the message about the visibility of our zones. But, in general, this approach justified.

Light_environment traces enter from the back

Source Engine turned out to have a terrible bug which makes the whole areaportal thing nearly meaningless. Numerous problems arise because of it: water breaks down into segments that pop in, well, you should be familiar with all this by now. Areaportal cuts the geometry unpredictably, like an ordinary secant plane, but its whole point is being predictable! Whereas areaportal brushes in Source Engine have absolutely no priority in splitting the map. It should be like this: first, the tree is cut the regular way. And when no suitable planes left, the final secant plane of areaportal is used. This is the only way to cut the sectors correctly.

Modern problems

The second optimization method, as I said, is increased size of the final leaf akin to QUAKE3. It is believed that a video card would draw a certain amount of polygons much faster than the CPU would check whether they are visible. This come from the very concept of visibility check: if visibility check takes longer than direct rendering, then well, to hell with this check. The controversy of this approach is determined by a wide range of video cards present at the hands of the end users, and it is strongly determined by the surging fashion for laptops and netbooks in which a video card is a very conditional and very weak concept (don’t even consider its claimed Shader Model 3 support). Therefore, for desktop gaming machines it would be more efficient to draw more at a time, but for weak video cards of laptops traditional culling will remain more reliable. Even if it is such a simple culling as I described earlier.

Decompression sickness simulator

Although I should also mention the principles of frustum culling, perhaps they are incomprehensible to some. Cutoff by frustum pyramid is actually pure mathematics without any compiler calculations. From the current direction of the player’s gaze, a clipping pyramid is built (the tip of the pyramid – in case someone can’t understand - is oriented towards the player’s point of view and its base is oriented in the direction of player’s view). The angle between the walls of the pyramid can be sharp or blunt - as you probably guessed already, it depends on the player's FOV. In addition, the player can forcefully pull the far wall of the pyramid closer to himself (yes, this is the notorious “MaxRange” parameter in the “worldspawn” menu of the map editor). Of course, OpenGL also builds a similar pyramid for its internal needs when it takes information from the projection matrix but we’re talking local pyramid now. The finished pyramid consists of 4-6 planes (QUAKE uses only 4 planes and trusts OpenGL to independently cut far and near polygons, but if you write your own renderer and intend to support mirrors and portals you will definitely need all six planes). Well, the frustum test itself is an elementary check for a presence of AA-box (AABB, Axis Aligned Bounding Box) in the frustum pyramid. Or speaking more correctly, this is a check for their intersection. Let me remind you that each branch has its own dimensions (a fragment of secant plane bound by neighboring perpendicular secant planes) which are checked for intersection. But unfortunately the frustum test has one fundamental drawback - it cannot cut what is directly in the player’s view. We can adjust the cutoff distance, we can even make that “ear feint” like they do in QFusion where final zFar value is calculated in each frame before rendering and then taken into account in entity clipping, but after all, whatever they say, the value itself was obtained from PVS-information. Therefore, neither of two methods can replace the other but they just complement each other. This should be remembered.

I gotta lay off the pills I'm taking

It seems that we figured out the rendering of the world and now we are moving on smoothly to cutting off moving objects... which are all the visible objects in the world! Even ones that, at te first glance, stand still and aren’t planning to move anywhere. Cause the player moves! From one point he still sees a certain static object, and from another point, of course, he no longer does. This detail should also be considered.
Actually, at the beginning of this article I already spoke in detail about an algorithm of objects’ visibility check: first we find the visible leaf for the player, then we find the visible leaf for the entity and then we check by visdata whether they see each other. I, too, would like to clarify (if someone suddenly does not understand) how each moving entity is given the number of its current visible leaf, i.e. directly for entity’s its own current position, and the leaves themselves are of course static and always in the same place.

Ostrich is such an OP problem solver

So the method described above has two potential problems:
The first problem is that even if A equals B, then, oddly enough, B is far from being always equal A. In other words, entity A can see entity B, but this does not mean that entity B see entity A, and, no, it’s not about one of them “looking” away. So why is this happening? Most often for two reasons:
The first reason is that one of the entities’ ORIGIN sit tight inside the wall and the Mod_PointInLeaf function for it points to the outer “zero” leaf from which EVERYTHING is visible (haven’t any of you ever flown around the map?). Meanwhile, no leaf inside the map can see outer leaf - these two features actually explain an interesting fact of an entire world geometry becoming visible and on the contrary, all objects disappearing when you fly outside the map. In regular mode, similar problems can occur for objects attached to the wall or recessed into the wall. For example, sometimes the sounds of a pressed button or opening door disappear because its current position went beyond the world borders. This phenomenon is fought by interchanging objects A and B or by obtaining alternative points for the position of an object, but all the same, it’s all not very reliable.

But lawyer said that you don't exist

In addition, as I said, there is another problem. It come from the fact that not every entity fits a single leaf. Only the player is so small that he can always be found in one leaf only (well, in the most extreme case - in two leaves on the border of water and air. This phenomenon is fought with various hacks btw), but some giant hentacle or on the contrary, an elevator made as a door entity, can easily occupy 30-40 leaves at a time. An attempt to check one leaf (for example, one where the center of the model is) will inevitably lead to a deplorable result: as soon as the center of an object will be out of the player’s visibility range, the entire object will disappear completely. The most common case is the notorious func_door used as an elevator. There is one in QUAKE on the E1M1. Observe: it travels halfway and then its ORIGIN is outside the map and therefore it must disappear from the player’s field of view. However, it does not go anywhere, right? Let us see in greater detail how this is done.
The simplest idea that comes to one’s mind: since the object occupies several leaves, we have to save them all somewhere in the structure of an object in the code and check them one by one. If at least one of these leaves is visible, then the whole object is visible (for example, it’s very tip). This is exactly what was implemented in QUAKE: a static array for 16 leaves and a simple recursive function SV_FindTouchedLeafs that looks for all the leaves in range hardcoded in "pev->absmins" and "pev->absmax" variables (pev i.e. a Pointer to EntVars_t table). absmins and absmax are recalculated each time SV_LinkEdict (or its more specific case of UTIL_SetOrigin) is called. Hence the quite logical conclusion that a simple change of ORIGIN without recalculating its visible leaf will take the object out of visibility sooner or later even if, surprisingly enough, it’s right in front of the player and the player should technically still be able to see it. Inb4 why one have to call UTIL_SetOrigin and wouldn’t it be easier to just assign new value to the "pev->origin" vector without calling this function. It wouldn’t.
With this method we can solve both former problems perfectly: we can fight the loss of visibility if the object's ORIGIN went beyond the world borders and level the difference of visibility for A->B versus visibility for B->A.

A secret life of monster_tripmine

Actually we’ve yet to encounter another problem, but it does not occur immediately. Remember, we’ve got an array of 16 leaves. But what if it won’t be enough? Thank God there are no beams in QUAKE and no very long elevators made as func_door either. For this exact reason. Because when the array is filled to capacity, the SV_FindTouchedLeafs function just stop and we can only hope that there won’t be that many cases when an object disappear right before our eyes. But in the original QUAKE, such cases may well be. In Half-Life, the situation is even worse - as you can remember there are rays that can reach for half the map, tripmine rays for example. In this case, a situation may occur when we see just the very tip of the ray. For most of these rays, 16 leaves are clearly not enough. Valve tried to remedy the situation by increasing the array to 48 leaves. That helped. On early maps. If you remember, at the very beginning of the game when the player has already got off the trailer, he enters that epic elevator that takes him down. The elevator is made as a door entity and it occupies 48 leaves exactly. Apparently, the final expansion of the array was based after its dimensions. Then the programmers realized that this isn’t really a solution, because no matter how much one would expand the array, it can still be lacking for something. So then they screwed up an alternative method for visibility check: a head branch (headnode) check. In short, this is still the same SV_FindTouchedLeafs but now it is called directly from the place of visibility check and with a subsequent transfer of visdata in there. In general, it is not used very often because it is slower than checking pre-accumulated leaves, that is, it is intended just for such non-standard cases like this one.
Well, and since, I hope, general picture of the clipping mechanism already beginning to take shape in your mind, I will finish the article in just a few words.
On the server, all objects that have already passed the visibility check are added to the network message containing information about visible objects. Thus, on the client, the list of visible entities is already cut off by PVS and we do not have to do this again and therefore a simple frustum check is enough. You ask, "why did we have to cut off invisible objects on the server when we could do this later when we are on the client already?" I reply: yes, we could, but now the objects cut off on the server didn’t get into the network message and saved us some traffic. And since the player still does not see them, what is the point of transferring them to the client just to check them for visibility after? This is a kind of double optimizing :)
© Uncle Mike 2012
submitted by crystallize1 to hammer [link] [comments]

MAME 0.204

MAME 0.204

After a busy four weeks, we’re ready to present the hotly-anticipated MAME 0.204 release. The most exciting stuff this month is definitely on the computer emulation side. We’ve added dozens of working cartridges to the BBC ROM software list, and ROMs required by expansion devices are handled more elegantly. Our HP9000/300 series emulation just keeps getting better: it’s now possible to install and use HP-UX 9, with X11 and the Vue desktop environment on an emulated HP9000/370 with accelerated window drawing and Ethernet networking support. There’s also been some progress on the road to Silicon Graphics workstation emulation. On top of that, we’re seeing preliminary emulation of standalone X Window System terminals.
Thanks to MAME’s modular, device-oriented architecture, improvements for one machine go on to benefit other machines using similar hardware. The Motorola 68k memory management unit improvements that allow HP-UX to run on the HP9000/300 series will also benefit Mac, NeXT and early Sun systems. The same AMD LANCE Ethernet controller is used in HP and Sun workstations, X11 terminals, the Amiga A2065 Zorro card, and numerous applications. This gives us a wealth of test cases, and a virtuous cycle where progress on one system can lead to a breakthrough on another.
With this release, all Tiger game.com games are fully playable. Two more Nintendo Game & Watch titles, Climber and Tropical Fish, have been emulated. XaviX-based TV game emulation continues to progress steadily: numerous e-kara karaoke cartridges have been dumped, preliminary sound output emulation has been implemented (sorry, no microphone support yet, but you can hear the tunes), and more systems have inputs connected.
Graphical effects in the bootleg arcade driving game Blomby Car have been improved, and bad dumps of graphics ROMs for Abnormal Check and the Korean version of Prehistoric Isle have been replaced. As always, you’ll enjoy support for more alternate versions of arcade games (including a version of Pinball Action that shows scores on external LED displays), bug fixes, and general emulation improvements.
You can read a more detailed account of this month’s changes in the whatsnew.txt file, or get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to emulation [link] [comments]

MAME 0.204

MAME 0.204

After a busy four weeks, we’re ready to present the hotly-anticipated MAME 0.204 release. The most exciting stuff this month is definitely on the computer emulation side. We’ve added dozens of working cartridges to the BBC ROM software list, and ROMs required by expansion devices are handled more elegantly. Our HP9000/300 series emulation just keeps getting better: it’s now possible to install and use HP-UX 9, with X11 and the Vue desktop environment on an emulated HP9000/370 with accelerated window drawing and Ethernet networking support. There’s also been some progress on the road to Silicon Graphics workstation emulation. On top of that, we’re seeing preliminary emulation of standalone X Window System terminals.
Thanks to MAME’s modular, device-oriented architecture, improvements for one machine go on to benefit other machines using similar hardware. The Motorola 68k memory management unit improvements that allow HP-UX to run on the HP9000/300 series will also benefit Mac, NeXT and early Sun systems. The same AMD LANCE Ethernet controller is used in HP and Sun workstations, X11 terminals, the Amiga A2065 Zorro card, and numerous applications. This gives us a wealth of test cases, and a virtuous cycle where progress on one system can lead to a breakthrough on another.
With this release, all Tiger game.com games are fully playable. Two more Nintendo Game & Watch titles, Climber and Tropical Fish, have been emulated. XaviX-based TV game emulation continues to progress steadily: numerous e-kara karaoke cartridges have been dumped, preliminary sound output emulation has been implemented (sorry, no microphone support yet, but you can hear the tunes), and more systems have inputs connected.
Graphical effects in the bootleg arcade driving game Blomby Car have been improved, and bad dumps of graphics ROMs for Abnormal Check and the Korean version of Prehistoric Isle have been replaced. As always, you’ll enjoy support for more alternate versions of arcade games (including a version of Pinball Action that shows scores on external LED displays), bug fixes, and general emulation improvements.
You can read a more detailed account of this month’s changes in the whatsnew.txt file, or get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to MAME [link] [comments]

MAME 0.204

MAME 0.204

After a busy four weeks, we’re ready to present the hotly-anticipated MAME 0.204 release. The most exciting stuff this month is definitely on the computer emulation side. We’ve added dozens of working cartridges to the BBC ROM software list, and ROMs required by expansion devices are handled more elegantly. Our HP9000/300 series emulation just keeps getting better: it’s now possible to install and use HP-UX 9, with X11 and the Vue desktop environment on an emulated HP9000/370 with accelerated window drawing and Ethernet networking support. There’s also been some progress on the road to Silicon Graphics workstation emulation. On top of that, we’re seeing preliminary emulation of standalone X Window System terminals.
Thanks to MAME’s modular, device-oriented architecture, improvements for one machine go on to benefit other machines using similar hardware. The Motorola 68k memory management unit improvements that allow HP-UX to run on the HP9000/300 series will also benefit Mac, NeXT and early Sun systems. The same AMD LANCE Ethernet controller is used in HP and Sun workstations, X11 terminals, the Amiga A2065 Zorro card, and numerous applications. This gives us a wealth of test cases, and a virtuous cycle where progress on one system can lead to a breakthrough on another.
With this release, all Tiger game.com games are fully playable. Two more Nintendo Game & Watch titles, Climber and Tropical Fish, have been emulated. XaviX-based TV game emulation continues to progress steadily: numerous e-kara karaoke cartridges have been dumped, preliminary sound output emulation has been implemented (sorry, no microphone support yet, but you can hear the tunes), and more systems have inputs connected.
Graphical effects in the bootleg arcade driving game Blomby Car have been improved, and bad dumps of graphics ROMs for Abnormal Check and the Korean version of Prehistoric Isle have been replaced. As always, you’ll enjoy support for more alternate versions of arcade games (including a version of Pinball Action that shows scores on external LED displays), bug fixes, and general emulation improvements.
You can read a more detailed account of this month’s changes in the whatsnew.txt file, or get the source and Windows binary packages from the download page.

MAMETesters Bugs Fixed

New working machines

New working clones

Machines promoted to working

New machines marked as NOT_WORKING

New clones marked as NOT_WORKING

New working software list additions

Software list items promoted to working

New NOT_WORKING software list additions

Source Changes

submitted by cuavas to cade [link] [comments]

Free Signals $ 60 seconds binary options free group demo ... Free Signals $ 60 second binary options demo account - YouTube Getting My 60 second binary options demo account To Work ... binary options demo account 60 seconds - YouTube 100 % accuracy 60 seconds Binary Option strategy 2019 iq option best strategy

A Guide To Demo Accounts ‘Try before you buy’ is a concept we’re all familiar with – both on and offline. When it comes to trading sites, this concept takes the form of the demo account; something that’s a feature of virtually all online binary options brokers you’ll come across. 60 Second Binary Options Demo Trading Account Here is our short list of binary options brokers who offer real demo trading accounts and 60 second trades . A Legit Demo Account at 24option – “Trading binary options involves substantial risk and may lead to loss of all invested capital.” 60 second binary options are a fast growing type of trading. These options can give you a large rate of return almost instantly, but there are many things you need to know before you start off in trading these fast paced options.They can have big returns, but there is also a great deal of risk associated with them. It is important for the traders Free 60 Second Binary Options Demo Account to realize that binary options trading and forex trading are two distinct topics. Many a time, the traders get confused between the two and then, end up losing in both of them. Before starting Free 60 Second Binary Options Demo Account out with any of them, it is imperative for the traders Free 60 Second Binary Options ... The unlimited demo account money is one of the most impressive aspects of an IQ Option demo account. Many other binary options brokers will give you a demo account with a fixed amount of virtual money so that they can force you to make a deposit as soon as possible. Some will even have a 60-second binary options demo account.

[index] [1978] [4107] [5048] [5374] [2960] [562] [453] [1417] [4162] [1957]

Free Signals $ 60 seconds binary options free group demo ...

👨🏽‍💻 IQ Option $ The best broker 2020: - https://bit.ly/3hMNU9b I'll show you 100% winning iq option strategy 7 win VS 0 loss Hello everyone!:) My name is Anastasia, but it's too hard to pronounce, that's why you may call me just ANA. I'm a pro trader for more than 2 years already a... binary option demo account binary option digital binary option dukascopy ... 60 Seconds binary options strategy 99 - 100% Winning (100% profit guaranteed) - Duration: 22:15. Hello everyone!:) My name is Anastasia, but it's too hard to pronounce, that's why you may call me just ANA. I'm a pro trader for more than 2 years already a... You Can Check Here: https://bit.ly/2PBWtbz - Getting My 60 second binary options demo account To Work It was also heading into an area of current resistance ...

http://binaryoptiontrade-arabic-trade-brocker.jabthewercontso.gq